THE NEW VALUE FRONTIER
  1. Hjem
  2. Nyheder
  3. 2020
  4. Kyocera introduces new innovative tooling solutions

Nyheder

Kyocera introduces new innovative tooling solutions

With the new KPK series and the MFWN mini series, Kyocera is adding two new product lines to its highly successful cutting tool product lines.

  • Industrial Tools

Kyoto/London - Kyocera is known for its innovative tooling solutions. Long tool life as well as high performance are also the advantages of the two new technologies, which extend the existing line: The KPK series is well prepared for high-performance cut-off solutions and strong clamping mechanism for added safety and security. The MFWN mini series is a smaller version of the original cutters, which also offer excellent performance and tool life.

The KPK series ensures stable and safe cutting

When it comes to cutting operations in general, the workpiece can be difficult to secure which leads to rigidity and chattering issues. Therefore, the cutting speed is usually low at the workpiece rotation center. Also, tools tend to be broken easily by chip troubles. All these issues are long gone with the KPK series as it features a new insert, blade and a tool block design for rigid, safe and speedy cut-off operations in the fields of steel, stainless steel, cast iron and aluminium. Due to the easy insert replacement, the down time is reduced to a minimum. The firmly secured insert uses three contact surfaces to ensure safe clamping which eliminates chattering completely and makes the cutting-off process a lot safer.

The unique chipbreaker technology is inherited from the KGD lineup and provides excellent chip control. Thanks to this advanced technology the tool life is longer and the machining stable. The rigid tool holder block not only prevents chattering but also provides an internal coolant which again adds to the tool life even under normal pressure.


KPK_Series_Panorama.jpg
KPK series


The MFWN Mini cutters convince like the original

With the low cutting force 90° milling cutter with double-sided 6-edge inserts, Kyocera launches a new mini series with a smaller diameter than the original MFWN milling cutters. The new line is based on the original, the MFWN milling cutter, but is in no way inferior to it. On the contrary, the mini series works at up to 5 mm D.O.C., while the large model can be used at a cutting depth of up to 8 mm. This product is also used for machining materials such as steel, stainless steel, cast iron and exotic materials.

The design is based on the original MFWN series with fracture-resistant inserts, low cutting forces and neutral inserts for various uses. Another plus is the insert lineup. It is comprehensive for various machining applications. In total there are three insert chipbreakers and four grades available. Namely for general use GM, for low cutting force SM and tough edge GH. Additional fine pitch and small diameter toolholders are available.


MF_Series_Panorama.jpg
MFWN Mini series


Editorial Material